|
Positive holding action with six standard solid pin types and many specials.
Sizes: 1/16" through 1/2" diameter
1/4" through 4-1/2" long
High alloy, heat treated pins for extra shear, shock and fatigue resistance
Materials: Cold drawn low carbon steel is standard. Other materials available.
Finishes: Zinc electroplating is standard. Other finishes available.
Commercial -- Tapered Threaded
Size 8/0 to 14 ------- Size 0 to 14
(Standard Type)
|
PRODUCT RANGE
(METRIC SERIES - EQUIVALENT STANDARDS)
|
| S.No |
Description |
As
per ISO Standard
International |
As
per EN Standard
European |
As
per IS
Standard
Indian |
As
per DIN
STD (old) German |
| 1 |
Parallel
Pins - Unhardened |
2338 |
22
338 |
2393 |
7 |
| 2 |
Parallel
Pins - Hardened |
8734 |
28
734 |
6689 |
6325 |
| 3 |
Taper
Pins - Unhardened |
2339 |
22
339 |
6688 |
1 |
| 4 |
Internal
Threaded Parallel Pins - Unhardened |
8733 |
28
733 |
10248
(Type A) |
7979 |
| 5 |
Internal
Threaded Parallel Pins - Hardened |
8735 |
28
735 |
10248
(Type B) |
7979 |
| 6 |
Internal
Threaded Taper Pins - Unhardened |
8736 |
28
736 |
3524
(Part I) |
7978 |
| 7 |
External
Threaded Taper Pins - Unhardened |
8737 |
28
737 |
3524
(Part II) |
7977 |
| 8 |
Full
Length Grooved Pins (with Pilot end) |
8739 |
28
739 |
7384 |
1470 |
| 9 |
Full
Length Grooved Pins (with Chamfer end) |
8740 |
28740 |
- |
1473 |
| 10 |
Socket
Grooved Pins (Reverse Taper) |
8741 |
28
741 |
7386 |
1474 |
| 11 |
Locking
Grooved Pins (Third Length Center) |
8742 |
28
742 |
7383 |
1475 |
| 12 |
Locking
Grooved Pins (Half Length Center) |
8743 |
28
743 |
- |
- |
| 13 |
Grooved
Taper Pins (Full Length) |
8744 |
28
744 |
7368 |
1471 |
| 14 |
Half
Length Grooved Taper Pins |
8745 |
28
745 |
7385 |
1472 |
| 15 |
Round
Head Grooved Pins (Rivet) |
8746 |
28
746 |
|
1476 |
| 16 |
Countersunk
Head Grooved Pins (Rivet) |
8747 |
28
747 |
- |
1477 |
| 17 |
Grooved
Pins with Under-cut (Type A,B,C) |
- |
- |
- |
1443 |
| 18 |
Clevis
Pins without Head |
2340 |
28
340 |
6862 |
1469 |
| 19 |
Clevis
Pins with Head |
2341 |
22
341 |
6863 |
1444 |
GROOVED PIN WITH
UNDER CUT (DIN-1469)
|
This
type Pins have three tapered grooves extending one-half the length of
the pin. This type is widely used
as a hinge or pivot Pin. Driven or pressed into a straight drilled hole,
the grooved portion locks in one part, while the ungrooved portion will
remain free. Also excellent for dowel and locating applications.
|
STRAIGHT PIN WITH GUIDE END
(DIN-1470
|
This pins have three full-length parallel
grooves. They are recommended for applications requiring maximum locking
effect where severe vibration and /or shock loading are present.
|
GROOVED TAPER PINS
(DIN-1471)
|
Socket Pin has three
reverse taper grooves extending one-half the length of the pin.
Recommended for use in blind holes as a stop pin, roller pivot, dowel,
or for certain hinge or linkage applications. Reverse taper grooves
permit easy insertion in blind holes.
|
HALF LENGTH GROOVED PINS (DIN-1472)
|
This pin has tree
parallel half-length grooves including pilot. It is a very versatile
pin, suitable for use in both blind and through holes as a spring anchor
pin. The annular groove opposite the locking end is used to anchor the
end loop of a tension spring. If snap or retainer rings are to be used,
special section annular grooves can be machined or order.
|
GROOVED DOWEL PINS
(DIN-1473)
|
This pin has three
full-length tapered grooves. This
popular type is used in applications requiring excellent locking effect
and ease of assembly. It is widely used in place of taper pins, rivets,
set screws and keys. Typical applications include keying sprockets,
gears, collars, knobs, handles, levers and wheels to shafts.
|
SOCKET GROOVED PINS
(DIN-1474)
|
This pin has parallel
half-length grooves located equidistant from each end. Widely used as
T handle on valves and tools. Also used as a cross pin, cotter pin,
pivot pin etc. where center locking is required
|
KNUCKLE (LOCKING) GROOVED PINS
(DIN-1475)
|
This pins have three
full-length parallel grooves with a short
pilot end to ensure easy starting. They are recommended for applications
requiring maximum locking effect where severe vibration and /or shock
loading are present.
|
|
ROUND HEAD GROOVED PINS
(DIN-1476)
|
This
pins are widely used for fastening light metal or plastic parts to heavier
members. They replace screws, rivets, peened pins and other types of
fasteners in applications such as attaching name plates, covers, brackets,
spring etc. The standard stud has a round head, Three parallel grooves
impressed on the shank of the stud provide the same positive, vibration
and shock-free holding. |
Industrial pins :
Cotter Pins
,
Dowel Pins
, Spring
Pins , Grooved
Pins , Taper
Pins , Escutcheon
Pins ,
Clevis
Pins
Related names: dowel pin, spring pin, hitch pin, hinge pin, taper pin, ball
hinge, t slotted extrusion, spring clip manufacturer, ball nose, pull tester
wire, l l fitting, industrial locking device, spring wire clip, pin brazing,
industrial clip spring, manufacturer of roll pin, 8 pin din, 9 pin to 15 pin,
twist hinge, industrial clamp clip
|
