Clevis Pins manufacturers  industrial Pins 

 Home
 About Us
 Contact Us
  Products
 
 

B I Fasteners

 We Manufacture Industrial Pins  in Bulk Quantity


Clevis Pins
Clevis Pins are offered in Stainless Steel. Defined as a shaft with a flat head and an opening across the bottom of the shank that a pin is inserted into. They are fastened with either circular pins (commonly referred to as 'ring dings'), safety pins, or cotter pins, and are common rigging essentials found on many sailboats. Often lost and misplaced, it's a good idea to have extra clevis pins aboard. 

COTTER PIN HOLES ARE DRILLED IN ALL PINS
All Types
All Metals
Commercial & Aircraft
Standard & Special
Clevis pins are available from the smallest (1/8" dia.) to as large as hot forgings with permit. Carbon steel is usually "off the shelf" up to 1" diameter.
This headed, unthreaded pin is inserted into a prepared hole and locked in place with a cotter pin at the chamfered shank end. Disassembly is possible. Used extensively in both the aircraft and automotive industries.

Industrial pins : Cotter Pins , Dowel Pins , Spring Pins , Grooved Pins , Taper Pins , Escutcheon Pins ,
                      Clevis Pins   

Related names: dowel pin, spring pin, hitch pin, hinge pin, taper pin, ball hinge, t slotted extrusion, spring clip manufacturer, ball nose, pull tester wire, l l fitting, industrial locking device, spring wire clip, pin brazing, industrial clip spring, manufacturer of roll pin, 8 pin din, 9 pin to 15 pin, twist hinge, industrial clamp clip
 

Site Developed by Digital Services © 2006